20th May, 2009
A typical picture update of the project from both aspects, the 3D and the physical interface.
Testing the spike generator for visual feedback on the terrain:
12th May, 2009
Although I’m still waiting to find out if the PCB I requested a week ago is ready I have been able to get on with trying to produce the remaining electronics.
I’ve found out that the Analogue-to-Digital-Converter of my USB board is pretty sensitive and simply connecting my circuits resulted in extreme noise rather than a smooth stable reading. So in order to solve this I’ve placed some beefier 1uF (rather than the 0.1uF on my GSR circuit) capacitors between the output and the ground which seems to stabilise it perfectly.
Hopefully they will illuminate the centre of my handle, which now has acrylic beads glued into the holes in order to catch the light. I took this photo with my light on, not in the dark…
Note the purple capacitor across the thermistor. Without it the circuit gives out a perfectly stable current, but the ADC doesn’t seem to think so.
23rd April, 2009
A possible means of measuring a specific resistance of an unknown component, skin for instance is to use a Wheatstone Bridge. Basically by measuring current across the centre of the bridge, and comparing the difference between one side which is a known value, the resistance of the unknown component can be obtained. If the unknown and known resistances were the same, then a current of 0V would flow through the centre.
20th April, 2009
My hunt for circuit schematics has obviously been ongoing for a while but I hadn’t really discovered much worthwhile until lately. Eventually I came across an excellently documented electronics project for producing a polygraph, one measurement of which it is taking is Galvanic Skin Response:
http://courses.cit.cornell.edu/ee476/FinalProjects/s2007/jsc59_ecl37/jsc59_ecl37/report2.html
Extra Stuff (Click to find out more!)